Sharp pg-a20x projector manual

This lamp based projector is capable of displaying 2, Lumens at its brightest setting with a native resolution of x The internal 3LCD technology is an innovative 3-chip design that sets itself apart by delivering vibrant, true-to-life images with better color brightness and a wider color gamut.

This projector was first available for purchase in August and has been discontinued by Sharp PG Series. The ANSI lumen rating measures the brightest white that a projector can produce by averaging nine light meter measurements taken across the projected image. BUYER BEWARE Either this projector's brightness specification does not cite an industry-accepted unit of measurement, or according to our calculations it seems unlikely that this projector is capable of producing the manufacturer's cited brightness specification.

Reviews Projectors Screens Accessories. Projector Database 11, Projector Forums Login. Large Venue Classroom Interactive Conference. Inspect lead wires are not pinched between the chassis.

Inspect all protective devices such as non-metallic. To be sure that no shock hazard exists, check for. Plug the AC cord directly into a volt AC outlet, Do not use an isolation transformer for this test. Using two clip leads, connect a 1. Use an AC voltmeter with sensitivity of ohm per volt. All checks must be repeated with the AC plug connection reversed. If necessary, a non-polarized adapter plug must be used only for the purpose of completing these checks.

Any reading of 0. Many electrical and mechanical parts in LCD Projector have special safety-related characteristics. These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily increased by using replacement components rated for higher voltage, wattage, etc. For continued protection, replacement parts must be identical to those used in the original circuit.

The use of a substitute replacement parts which do not have the same safety characteristics as the factory recommended replacement parts shown in this service manual, may create shock, fire or other hazards. Be very careful in handling this component when the power is on.