Dwl-2100ap setup wizard

Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks.

Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Configurations are easily changed and range from Peer-to-Peer networks suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. This technology works by transmitting highspeed digital data over a radio wave utilizing OFDM O rthogonal F requency D ivision M ultiplexing technology.

Setting up a Wireless Infrastructure Network. For a typical wireless setup at home as shown above , please do the following: You will need broadband Internet access a Cable or DSL-subscriber line into your home or office.

See the printed Quick Installation Guide included with the network adapter. However, if you have changed the admin password, please enter the correct password. Band- Mode- Access Point is selected from the pull down menu.. The SSID factpru default setting is de- fault.

The SSID can be easily changed to connect to an existing network or to establish a new wireless network. Enabling this feature broadcasts the cast- SSID across the network. Channel- 6 is the default channel. All devices on the network must share the same channel. Auto Channel Select Enable or Disable. Enable this feature to auto-select the channel Scan- for best wireless performance. Radio- Select On or Off. WMM stands for Wi-Fi Multimedia, by enabling this feature it will improve the user experience for audio and video applications over a Wi-Fi network.

Radius Secret- Enter the the Radius secret. Enter a PassPhrase in the corresponding field. Wireless IEEE Type: Group Key Select the interval during which the group key wll be valid.

The Update Interval: default value of is recommended. Band- Mode WDS is selected from the pull-down menu. Enable this feature to auto-select the channel for Scan best wireless performance. AES is used here. Band- Mode AP Repeater is selected from the pull-down menu. Band- Mode- AP Client is selected from the pull-down menu.

Site Survey- into an Site survey to choose the root AP in your network. The default IP address is: The default subnet mask is Enter in the lP address of the gateway on your network.

Apply- Click Apply to save the changes. Beacon Interval- Beacons are packets sent by an access point to synchronize a network. Specify a beacon interval value. The default is recommended. DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. Left Antenna: The AP will not switch antenna and the radio will use the left antenna when facing the AP to transmit and receive packets.

Rate Settings- For For You can only view or download manuals with. Sign Up and get 5 for free. Upload your files to the site. You get 1 for each file you add. Get 1 for every time someone downloads your manual. Buy as many as you need. View and download manuals available only for. Register and get 5 for free. Upload manuals that we do not have and get 1 for each file. Get 1 for every download of your manual. Buy as much as you need. This insures much greater security than the standard.

WEP security. By contrast, the previous WEP encryption implementation. The LAN Port is. The SSID factpru default setting is de-. The SSID can be easily changed to connect to an existing network. Select Enable or Disable. Enable this feature to auto-select the channel. Open System For Open System authentication, only the wireless clients with the same WEP key will be able to communicate on the wireless network.

The Access Point will remain visible to all devices on the network. Shared key For Shared Key authentication, the Access Point cannot be seen on the wireless network except to the wireless clients that share the same WEP key. Stations have the option of using either but must still have the correct key to decrypt data. WPA uses stronger security than WEP and is based on a key that changes automatically at a regular interval.

It uses TKIP encryption to protect the network through the use of a pre-shared key. Also referred as private settings. The default IP address is IP address The default IP address is Try to set a system restore point before installing a device driver. Operating systems with Windows XP, and password are, etc. Run Wizard Click You will see the following screen. Run Wizard Click Apply to be in patience. In our informal range tests, we were still able to surf the Web one residential block from the device's location.

AP can't send standard traps. It is highly recommended to always use the most recent driver version available. Allows you to enable or disable the broadcasting of the SSID to network clients. If your firmware is damaged or you performed a hard reset incorrectly, you should see the following screen.

By maintaining compatibility with your existing wireless network equipment, the DWLAP lets you upgrade to d link higher speed at the pace you want. It can't reset data rate settings 5.

The trap status and server ip can not be set. The status light will be quite difficult to change your reseller. Internet Explorer Version 6. When AP mode is wds with ap, there is a lack of some logs on Syslog. Step 9 Click Apply to a good wireless network management interface. This driver update utility makes sure that you are getting the correct drivers for your DWLAP and operating system version, preventing you from.