Speakers projector setup

Dolby Atmos sound is what the latest high budget Hollywood movies are recorded in. If you have seen a movie with Dolby Atmos sound, then you know what we are talking about.

It is sound technology at its pinnacle. Nothing comes close to it. Now we can experience this fantastic Dolby Atmos surround sound in our home theater systems at home.

Our existing surround speakers can be used and the price for setting up a Dolby Atmos surround system at home is not that expensive. The video below demonstrates what Dolby Atmos surround sound is and also explains how it is possible to convert existing 5. The new Dolby Atmos home audio system can be either the standard 5. When 2 overhead speakers are used in a 5.

Similarly with the use of 2 or 4 overhead speakers in a 7. Instead of going through all the hassles of setting up multiple speakers and the complicated wiring of a 7. The video below explains how Yamaha achieves this magic.

Soundbars are an easy to install surround sound system consisting of just two pieces of equipment, the soundbar itself and an optional subwoofer.

The amplifier is built into the long sound bar which is kept in the same position as the central speaker in a surround sound system. There is no complicated wiring to be done, just to connect the sound output from the DVD, Blu-ray player or STB directly to the soundbar and you are all set to go. This would allow you to have a wireless connection and transmit audio from your projector to your Bluetooth speakers.

If you do not have Bluetooth speakers or want to use your home entertainment HiFi system, you could consider another solution. Your projector would still need Bluetooth capability, however, for this method to work.

You would need to purchase a Bluetooth audio adapter that lets you transmit wireless signals and then convert them into analog audio signals.

You would take this device and use an RCA cable to connect it to your active speakers, AV receiver, or power amplifier. Check out this Bluetooth Audio Receiver on Amazon here.

The added benefit of acquiring one of these receivers is that you would also be able to connect and stream audio from other mobile devices that you use, such as your smartphone or tablet. What if your projector has no audio connections or it does not support wireless connectivity? There is a way in which you can still connect your speakers and obtain sound.

In the previous examples where we connected speakers to your projector using an AV receiver, the set up was different. The set up entailed audio being sent from your projector to the AV receiver or powered amplifier, and then one of those devices would drive the speakers.

In this scenario, because your projector does not have audio outputs, you would have to first send the data video and audio through the AV receiver and then to the projector last. Due to the fact that an AV receiver is able to allow the pass-through of video and audio, you would be able to do this. However, a powered amplifier would not work here because it only amplifies the sound and does not support video pass-through.

The most likely scenario is that you would use an HDMI connection to do this. You would then send the video signal from your AV receiver to your projector and the audio signal from your AV receiver to your speakers. The process is pretty simple; you just have to remember the correct order in which you have to route all your devices. This scenario would entail the use of a PC, laptop, Mac, or camera.

Our example uses a laptop, but this will work for any device with an HDMI output. We conclude that there are many ways in which you are able to connect your projector to speakers for sound. This is because modern projectors have various connection types that allow for transmitting audio. The only way you can connect speakers without the use of a medium powered amplifier or AV receiver is if you have Bluetooth speakers, a Bluetooth audio receiver, and a projector that supports wireless capabilities or if you have active speakers.

Both of these methods may require additional adapters or cables. Then finally, we also realized that if your projector does not support any type of audio output, you are able to route the signal from your source and split it, sending the video to your projector and the audio to speakers in the form of active speakers, a powered amplifier, or an AV receiver.

Question Can a 5. Started by thelonewolf20 Yesterday at PM Replies: 3. Tom's Guide is part of Future plc, an international media group and leading digital publisher. Visit our corporate site. All rights reserved. England and Wales company registration number Top Bottom. Dec 30, Question Connecting Sony mhc vx7 speakers to lg smart tv. Nov 30, Nov 29, Question Projector and wifi speakers. Oct 5, Mar 20, Jul 25, May 27, Jun 9, Ideal 5.

For sound quality, digital connections coaxial, optical or HDMI are preferred, provided you choose the right cables. It is also possible to connect your audio equipment directly to the video projector if it has an audio output. Frederick Douglass is the senior home entertainment expert and focused on reviews.